Negotiable
The date of payment from buyers deliver within days
Zhejiang
Long-term effective
2020-03-18 01:17
385
Company Profile
TS Mould Co., Ltd.By certification [File Integrity]
Contact:mould(Mr.)
Email:
Telephone:
Phone:
Area:Zhejiang
Address:Zhejiang
1. Product Introduction of Automotive Bumper Mould
Feature:
● Short molding cycle can reduce waste
● Save on raw materials and reduce costs
● Our mold quality is very good
Advantage:
● We have experienced engineers and quality control team as our strong backing.
● The quality department inspects each procedure
● we have professional plastic teamwork and production lines.
2. Product Specification for Automobile Bumper Mold
Automobile bumper mold | |
Mould Name |
bumper mold |
Mould Cavity |
1 cavities |
Mould size |
According to the sample size |
Mould Material |
45#,P20,H13,718,2738,NAK80,S136,etc. |
Mould Life |
300,000 shots |
Runner System |
Hot runner |
Ejection system |
Hydraulic Cylinder |
Mould Running |
Automatically |
Design software |
UG, PROE, CAD, etc. |
Plastic material |
PP |
Process Machine |
CNC, High-Speed Carve, EDM, Wire Cut, Driller, Grinder, fly cutter, etc. |
Package |
Wooden Case/pallet |
3. Production Details
We are a professional mold manufacturer for the Injection mold. We are expecting to become your good partner to provide you high-quality mold at a good price.
4. Mold Flow Analysis
Mold flow analysis, use of simulation software to verify the mold filling process, wiring, deformation, and other basic mold design details. These characteristics are clearly moulded of high quality, to ensure that in initial stages of the project of accurate, so can in T1, 100% of success.
5. Inspection Tools
Ultrasonic Testing (Ultrasonic Testing) is abbreviated as UT, also called Ultrasonic Testing. It uses ultrasonic technology for testing and is one of five conventional nondestructive testing methods. Non-destructive testing is a testing method to inspect the surface and internal quality of the inspected parts without damaging the working state of the workpiece or raw materials. |
In the coordinate measurement technology, we first need to establish the actual visible coordinate system by mechanical methods and then correspond to the measurement points with the coordinate representation method, and then use the spatial geometric relationship to obtain the required measurement values. |
6. Mould Manufacturing Standards
1) Mould external gauge
● The nameplate shall print the mold number, the mold weight (KG), and the mold outline size (mm). The characters shall be printed in 1/8 inch type code, and the characters shall be clear and neatly arranged.
● The nameplate must be fixed on the foot of the mold near the back template and the reference Angle (15mm away from each side), fixed with four rivets, reliable and not easy to peel off.
2) Ejection reset, Pull core and pick up
● Ejection smooth, no delay, no noise.
● Bevel top surface polishing, bevel top surface is lower than the core surface 0.1 -- 0.15mm.
3) Cooling
● Cooling water channels must be full, unimpeded, conform to the requirements of the drawings.
● Reliable sealing and no leaking, easy maintenance, water mouth tie ribbons during installation.
4) General pouring system (excluding hot runner)
● Three board module in the nozzle plate cutting, runner inlet diameter must be less than the diameter of 3. Ball head office has dented the steps of the nozzle plate of a depth of 3 mm.
● The pointed gate should be processed according to gate specifications.
5) Hot runner system
● Hot runner wiring layout is reasonable, easy to repair, and the wiring number and one - to - one correspondence.
● Safety tests, in order to avoid safety accidents such as leakage.
6) Molding parts, parting surface, and exhaust slot
● The vent groove depth is less than the plastic overflow boundary value, PP is less than 0.03 mm, ABS, PS, such as less than 0.05 mm, exhaust slot by machine tool processing, no manual grinding machine grinding marks.
● Insert bedding-in in place (using several different inserts to bedding-in case insert size error) put the smooth, reliable positioning.
7) Packaging
● The feed side of the gate sleeve is blocked with butter.
● Mould product drawings, structure drawings, waterways, spare parts and mold drawing material supplier details, specification, packing list, the electronic document is complete.
7. Our Working Environment
8. Product Qualification of Mould
Our Factory
We're well-known as one of the leading plastic auto parts mold manufacturers and suppliers in China, featured by cheap products and good service. Welcome to buy customized plastic auto parts mould at competitive prices from our factory.
Our Processing Equipment
9. Delivery, Shipping and Serving
10. FAQ
Q1: How to receive a quotation in the shortest time?
A: When you send us an inquiry, please kindly make sure all details with us, such as quantity, cavity, sample, weight, etc.
Q2: How to ensure the products' quality before shipment?
A: If you don't have time to visit our factory, we will be like your inspection worker. We will supply a picture&check report or sample. (but need you to pay freight charge)
Q3: How about quality control in your factory?
A: “ Quality is the key point, do what customers need”. TS MOULD factory focuses on quality, quality control from beginning to the end. Every piece of goods is tested strictly before packing and delivery.
http://www.tsbestmould.com/